top
Home Store_info Policies Ebay On-Line Store Rock Crawling Links facebook
E-flite Blade mCX RTF and BNF
MCX The Blade® mCX RTF is an ultra micro-sized version of the Blade CX/CX2, offering first-time pilots the ability to learn how to fly with ease and experienced heli pilots the ability to fly anytime, anywhere indoors. The Blade mCX offers unsurpassed stability and incredible control through the coaxial, counter-rotating head design and Spektrum™ 2.4GHz DSM2™ control. And, thanks to its rotor span of just 7.5 inches and one-ounce flying weight, the Blade mCX can be flown indoors almost anywhere—from an office to a small bedroom or living room.

The Blade mCX comes 100% factory-assembled, flight-tested and ready to fly right out of the box—no assembly or setup required. Included in the box is the Li-Po battery and convenient AA battery-powered DC Li-Po charger, 4-channel transmitter equipped with Spektrum 2.4GHz DSM2 technology, and 8 AA batteries (4 for the transmitter, 4 for the charger). The DSM2 technology offers freedom from frequency restrictions and allows the Blade mCX to be flown anywhere, anytime indoors with precise 4-channel control.

When it comes to ultra-micro heli fun everyone can enjoy, you simply can’t beat the value and performance of the Blade mCX. It’s just another way E-flite is advancing electric flight.

Also available in a Bind-N-Fly™ version (EFLH2280)

Key Features

  • 100% factory-assembled, test-flown and ready-to-fly right from the box
  • Includes everything needed to fly—there's nothing extra to buy
  • Ultra-micro size and weight perfect for indoor flying
  • Innovative airframe design and electronic components offer incredible durability and precise control for excellent manueverability
  • Coaxial, counter-rotating rotor head design for unsurpassed stability and ease of flight
  • 4-channel transmitter equipped with Spektrum™ 2.4GHz DSM2™ technology, digital trims and dual rates
  • Factory-installed 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro and fully proportional servos

All you need to do is bind your DSM2 transmitter or module to the Blade mCX's receiver and your adventure into the new era of RC flight begins. With its cutting-edge engineering, design, technology and performance, the Blade mCX Bind-N-Fly™ is sure to provide you with hours of helicopter flying fun.

The unique 5-in-1 control unit with Spektrum 2.4GHz DSM2 compatible receiver, main motor ESCs, mixer, gyro and fully proportional servos will bind to your DSM2 transmitter to give you the most advanced mCX flight experience. You can take full advantage of utilizing dual rates, mixing and other capabilties of your transmitter.  You can experience heading-lock-like performance and fully proportional control all in this one-ounce package, just bind and fly. 

Compatible with the following DSM2 transmitters:

• E-flite® LP5DSM (included with Blade CX2)

• ParkZone® Vapor™ transmitter

• JR® 12X

• JR X9303

• Spektrum DX5e

• Spektrum DX6i

• Spektrum DX7

• Spektrum Modules

Ready to Fly
Bind and Fly
 
Losi 1/18-scale Mini-Rock Crawler

Rock_Crawler The ready-to-run 1/18-scale Mini-Rock Crawler incorporates the key design principles of full-scale rock crawlers into a 1/18-scale package. The truly innovative Mini-Rock Crawler features a multi-link suspension, heavy-duty metal ring and pinion gears, a 3-gear center transmission with a spool and slipper, a high-torque motor and an Electronic Speed Control (ESC) that has been re-tuned specifically for rock crawling.

Features

  • Metal Twin Vertical Plate (TVP) chassis design
  • Multi-link crawler suspension design
  • Heavy duty metal ring and pinion gears, axles and axle shafts
  • Gusseted drive cases for increased strength and durability
  • A true locked-out rear end design, no steering spindles
  • Heavy duty universals with slide-type outdrives and metal yolks
  • Alloy lower suspension links with captured ends
  • Extra long oil-filled shocks, front and rear
  • Solid axles with optimized drive shaft angles allow for a freely-rotating driveline throughout the entire suspension travel
  • Telescoping slider driveshafts
  • 3-Gear center transmission with spool and slipper
  • 4WD with locked differentials
  • Ball bearings throughout
  • 1.9" Beadlock-style wheels with 12mm wheel hexes
  • New electronic FWD/RWD rock crawling specific speed controller (ESC) with extra drag brake
  • High-torque rock crawler specific motor
  • Mini high-torque rock crawling servo
  • Tuber style body: scale looks of the full-scale rock crawling machines; 3 colors to choose from: red, blue and black
  • Features Mini-Rock Claw tires for superior traction (modeled after the National Champion winning 1/10-scale Rock Claw 2.2 tires)
  • Losi LSR3000 radio system featuring Spektrum™ 2.4GHz DSM® technology for crystal-free operation
  • 7.2V 1100mAh NiMH battery and charger
  • 4 AA batteries included for transmitter

Product Specifications

Scale:1/18

Length:12 in (304.8mm)

Width:7 in (177.8mm)

Wheelbase:8.5 in (215.9mm)

Weight:2.04 lb (926 g)

Chassis:Metal Twin Vertical Plate (TVP)

Suspension:Multi-link

Drive Train:4WD with lock differentials

Tire Type:Mini-Rock Claw tires

Speed Control:Electronic FWD/RWD with drag brake

Radio:LSR3000 Radio with Spektrum 2.4GHz DSM

Batteries:7.2V 1100mAh NiMH battery

Charger:Included

Wheel Size:1.9 in (48.26mm) (hex is 12mm)

Kit/RTR:RTR

Body:Pre-painted,Tuber-style in red, blue or black

Ball Bearings:Complete